Automatic flush bolt
OLDA 43 HZA-32T

note. This product was previously called 43 HZ-32T

Function:

Automatic, single action flush bolt for non-spring-loaded bolting of passive door leaf in double doors.

Features:

OLDA 43 HZA-32T is bolted and unbolted automatically and has bolt diameter 12 mm, backset 32 mm (34 mm with forend) and forend width 22 mm.

This Product has a bolt with length 60 mm, with good adjustability, which makes it possible to use, also when there is a large gap between the door leaf and frame or sill, or when a sill is not fitted. It is also suitable for integration with automatic drop seals etc.
The earlier version with bolt length 30 mm is advantageously replaced with the 60 mm version – due to having the same total product height.

Similar dimensions as manual flush bolt OLDA 33 HZM-32.

Manufactured in steel. Coating: electro zinc plating.

Usage:

To be recessed into doors of steel or aluminium profiles. Both up and/or down in the edge of passive door leaves.

Installation:

OLDA 43 HZA-32T is fitted recessed in the edge of the door, with cut-out (flush) or without cut-out for the forend.

Fixed with two screws.

OLDA type 1 automatic flush bolt is fitted upper right and lower left in passive door leaf.

OLDA type 2 automatic flush bolt is fitted lower right and upper left in passive door leaf.

Accessories:

Lock tube LT 12 (17 x 13).

Guide tube GT 12.

Strike plate SP 20.

Specification:

• Automatic, single action and non-spring-loaded bolt function
• Bolt:
  • length: 60 mm
  • diameter: 12 mm
  • projection: 22 mm
  • adjustability: -4 / +15 mm
• Rectangular electro zinc plated forend in steel
• Product:
  • width: 22 mm
  • height: 200 + 70 mm
  • depth: 42 mm including forend: 2 mm
• Backset including forend: 34 mm
• Installation: in door leaf edge
  • fixed with electro zinc plated screws, countersunk (rec. dim. 3,5×16 mm), 2 pcs.
• Accessories:
  • Lock tube LT 12 (17 x 13)
    • fastened with electro zinc plated screws, countersunk (rec. dim. 3,5×16 mm), 2 pcs.
      
  • Guide tube GT 12
    • fastened with electro zinc plated screws, countersunk (rec. dim. 3,5×16 mm), 2 pcs.
  • Strike plate SP 20
    • fastened with electro zinc plated screws, countersunk (rec. dim. 4,2×16 mm), 2 pcs.
• Material: steel
• Coating: electro zinc plating

Product ID:

OLDA 43 HZA-32T:

• type 1: 10-143-1001-11xx
• type 2: 10-143-2001-11xx

note. Accessories and screws for installation are ordered separately, or as a part of different product KITs.

Related products:

OLDA 33 HZM-32
– manual flush bolt, with similar dimensions

OLDA 43 HZA-20T
– automatic flush bolt, with lesser backset

Complementary products:

OLDA accessories for flush bolts

OLDA FS 12 and 15
– stainless-steel dust-excluding floor sockets for screw fitting.

OLDA FS R12 and R15
– stainless-steel dust-excluding round floor sockets especially designed for gluing.

Also see:

Type of OLDA flush bolt – guide (pdf)

OLDA Flush bolt guide (pdf)

OLDA Fittings school

Accessory guide OLDA (pdf)

Documents:

product documents

product leaflet
pdf: type1   /   type2

dimensions
pdf: type1   /   type2

installation
 - with forend cut-out:
pdf: type1   /   type2
 - without forend cut-out:
pdf: type1   /   type2

product views - 2D

pdf: type1   /   type2
dxf: type1   /   type2
dwg: type1   /   type2

product models - 3D

stp: type1   /   type2
igs: type1   /   type2
dwg: type1   /   type2
sat: type1   /   type2
ipt: type1   /   type2
stl: type1   /   type2

pdf 3D: type1   /   type2