Double action manual flush bolt
OLDA 511 HZM-32
Function:
Manual, double action flush bolt for non-spring-loaded bolting of passive door leaf in double doors, windows and doors.
Features:
OLDA 511 HZM-32 is bolted with a handle, fitted in the products 8 mm square hole which rotates 90 degrees. Backset 32 mm (35 mm with forend), forend width 20 mm and two M10 couplings.
Manufactured in steel. Coating: electro zinc plating.
Stainless steel forend.
Usage:
To be recessed into the edge of door leaves and windows of wood, steel or aluminium profiles. Enables a hidden “espagnolette” function in doors/windows with optional handle.
Installation:
OLDA 511 HZM-32 is fitted recessed in the edge of the door-/window, with cut-out (flush) or without cut-out for the forend. Fixed with two screws.
A handle is mounted on one or two sides depending on the desired function and level of security.
Suitable dimension of rod is cut to length and connected at the top and/or bottom. M10 rod is connected without adapter to the connectors on 511 HZM, M8 rod is connected with M10/M8 adapter and M6 rod is connected with M10/M6 adapter.
Guide tube GT and lock tube LT are matched with the desired bolt dimension. Bolt with length 60 mm, is fitted on rod, adjusted in height and fixed with counter screw.
Accessories:
60 mm bolts with diameter 8-16.
Rods; M10, M8 or M6.
Adapters; from M10 to M8 or M6.
Guide tube GT.
Lock tube LT.
Specification:
- Manual, double action and non-spring-loaded bolt function
- Projection: 12 mm
- Round forend in stainless steel
- Product:
- width: 20 mm
- height: 225 mm
- depth: 50.5 mm including forend: 3 mm
- Backset including forend: 35 mm
- Installation: in door/window edge
- fixed with stainless steel screws, countersunk (rec. dim. 4.2×25 mm), 2 pcs.
- Accessories:
- Please contact us for information regarding combinations of bolts, rods and adapters and also tubes:
- Guide tube GT
- fastened with electro zinc plated screws, countersunk (rec. dim. 3.5×16 mm), 2 pcs.
- Lock tube LT
- fastened with electro zinc plated screws, countersunk (rec. dim. 3.5×16 mm), 2 pcs.
- Material:
- steel
- forend: stainless steel
- Coating: electro zinc plating
Product ID:
OLDA 511 HZM-32:
- 11-511-00X3-12XX
note. Accessories and screws for installation are ordered separately, or as a part of different product KITs.
Example of KIT:
OLDA 511 HZM-32, two bolts Ø12×60 mm (M6), two guide tubes GT 12, two lock tubes LT 12 (17×13) and two adapters M10/M6. (Supplemented with two M6 rods and the desired handle.)
Related products:
Complementary products:
OLDA accessories for flush bolts
OLDA FS 12 and 15
– stainless-steel dust-excluding floor sockets for screw fitting.
OLDA FS R12 and R15
– stainless-steel dust-excluding round floor sockets especially designed for gluing.
Also see:
Type of OLDA flush bolt – guide (pdf)
Documents:
511 HZM-32
product documents product leaflet pdf: 511 HZM-32 dimensions pdf: 511 HZM-32 installation - with forend cut-out: pdf: 511 HZM-32 - without forend cut-out: pdf: 511 HZM-32
schematics picture pdf: 511 HZM-32 views pdf: 511 HZM-32
product views - 2D pdf: 511 HZM-32 dxf: 511 HZM-32 dwg: 511 HZM-32
product models - 3D stp: 511 HZM-32 igs: 511 HZM-32 dwg: 511 HZM-32 sat: 511 HZM-32 ipt: 511 HZM-32 stl: 511 HZM-32 pdf 3D: 511 HZM-32
