Manual flush bolt
OLDA 33 HZM-20
Function:
Manual, single action flush bolt for non-spring-loaded bolting of passive door leaf in double doors.
Features:
OLDA 33 HZM-20 is bolted manually with a lever mechanism and has bolt diameter 12 mm, backset 20 mm (23 mm with forend) and forend width 22 mm.
The basic version of this product has a bolt with length 30 mm. An alternative version with bolt length 60 mm and increased adjustability is also available, which makes it possible to use it also when there is a large gap between the door leaf and frame or sill, or when a sill is not fitted. It is also suitable for integration with automatic drop seals etc.
Similar dimensions as automatic flush bolts OLDA 43 HZA-20T type 1 och type 2.
Manufactured in steel. Coating: electro zinc plating.
Usage:
To be recessed into doors of steel or aluminium profiles, both up and/or down in the edge of passive door leaves.
Installation:
OLDA 33 HZM-20 is fitted recessed in the edge of the door, either flush, with cut-out or without cut-out for the forend.
Fixed with two screws.
Accessories:
Lock tube LT 12 (17 × 13).
Guide tube GT 12 (20).
Specification:
- Manual, single action and non-spring-loaded bolt function
- Bolt:
- diameter: 12 mm
- projection: 20 mm
- adjustability:
- bolt 30 mm: -7 / +7 mm
- bolt 60 mm: -4 / +15 mm
- Rectangular electro zinc plated forend in steel
- Product:
- width: 22 mm
- height: 200 + 70 mm
- depth: 30 mm including forend: 3 mm
- Backset including forend: 23 mm
- Installation: in door leaf edge
- fixed with electro zinc plated screws, countersunk (rec. dim. 3.5×16 mm), 2 pcs.
- Accessories:
- Lock tube LT 12 (17 × 13)
- fastened with electro zinc plated screws, countersunk (rec. dim. 3.5×16 mm), 2 pcs.
- fastened with electro zinc plated screws, countersunk (rec. dim. 3.5×16 mm), 2 pcs.
- Guide tube GT 12 (20)
- fastened with electro zinc plated screws, countersunk (rec. dim. 3.5×16 mm), 2 pcs.
- Lock tube LT 12 (17 × 13)
- Material: steel
- Coating: electro zinc plating
Product ID:
OLDA 33 HZM-20 with bolt 30 mm:
- 11-033-0002-11xx
note. Accessories and screws for installation are ordered separately, or as a part of different product KITs.
Alternative version:
OLDA 33 HZM-20 with bolt 60 mm:
- 11-133-0002-11xx
note. Accessories and screws for installation are ordered separately, or as a part of different product KITs.
Related products:
OLDA 33 HZM-10
– manual flush bolt, with the same dimensions but lesser backset (10/13 mm)
OLDA 33 HZM-32
– manual flush bolt, with the same dimensions but greater backset (32/35 mm)
OLDA 43 HZA-20T
– automatic flush bolt, with similar dimensions
Complementary products:
OLDA accessories for flush bolts
OLDA FS 12 and 15
– stainless-steel dust-excluding floor sockets for screw fitting.
OLDA FS R12 and R15
– stainless-steel dust-excluding round floor sockets especially designed for gluing.
Also see:
Type of OLDA flush bolt – guide (pdf)
Documents:
33 HZM-20 with bolt 30 mm
product documents product leaflet pdf: 33 HZM-20 bolt 30 mm dimensions pdf: 33 HZM-20 bolt 30 mm installation - with forend cut-out: pdf: 33 HZM-20 bolt 30 mm - without forend cut-out: pdf: 33 HZM-20 bolt 30 mm
product views - 2D pdf: 33 HZM-20 bolt 30 mm dxf: 33 HZM-20 bolt 30 mm dwg: 33 HZM-20 bolt 30 mm
product models - 3D stp: 33 HZM-20 bolt 30 mm igs: 33 HZM-20 bolt 30 mm dwg: 33 HZM-20 bolt 30 mm sat: 33 HZM-20 bolt 30 mm ipt: 33 HZM-20 bolt 30 mm stl: 33 HZM-20 bolt 30 mm pdf 3D: 33 HZM-20 bolt 30 mm
33 HZM-20 with bolt 60 mm
product documents product leaflet pdf: 33 HZM-20 bolt 60 mm dimensions pdf: 33 HZM-20 bolt 60 mm installation - with forend cut-out: pdf: 33 HZM-20 bolt 60 mm - without forend cut-out: pdf: 33 HZM-20 bolt 60 mm
product views - 2D pdf: 33 HZM-20 bolt 60 mm dxf: 33 HZM-20 bolt 60 mm dwg: 33 HZM-20 bolt 60 mm
product models - 3D stp: 33 HZM-20 bolt 60 mm igs: 33 HZM-20 bolt 60 mm dwg: 33 HZM-20 bolt 60 mm sat: 33 HZM-20 bolt 60 mm ipt: 33 HZM-20 bolt 60 mm stl: 33 HZM-20 bolt 60 mm pdf 3D: 33 HZM-20 bolt 60 mm
