Manual flush bolt
OLDA 30 HZM

note. This product was previously called 30 HZ

Function:

Manual, single action flush bolt for non-spring-loaded bolting of passive door leaf in double doors.

Features:

OLDA 30 HZM is bolted manually with a lever mechanism and has bolt diameter 10 mm, backset 12 mm and forend width 25 mm.

Same dimensions as automatic flush bolts OLDA 28 HZA type 1 and type 2.

Manufactured in steel. Coating: electrozinc plating.

Usage:

To be recessed into wooden doors, both up and/or down in the edge of passive door leaves.

Installation:

OLDA 30 HZM is fitted recessed in the edge of the door, either flush, with cut-out or without cut-out for the forend.

Fixed with four screws.

Accessories:

Lock plate LP 10.

Specification:

  • Manual, single action and non-spring-loaded bolt function
  • Bolt:
    • diameter: 10 mm
    • projection: 20 mm
    • adjustability: -1 / +6 mm
  • Round electrozinc plated forend in steel
  • Product:
    • width: 25 mm
    • height: 168 mm
    • depth: 20 mm
    • forend thickness: 2 mm
  • Backset including forend: 12 mm
  • Installation: in door leaf edge
    • fixed with electrozinc plated screws, countersunk (rec. dim. 3,5×40 mm), 4 pcs.
  • Accessories: Lock plate LP 10
    • fastened with electrozinc plated screws, countersunk (rec. dim. 3,5×16 mm), 4 pcs.
  • Material: steel
  • Coating: electrozinc plating

Product ID:

product id [2022] – OLDA 30 HZM:
  • ID: 11-030-0000-11xx

note. Accessories and screws for installation are ordered separately, or as a part of different product KITs.

article number [2021] – OLDA 30 HZ:
  • 47101430 (retail packaging 1 pce. – KIT including accessories and screws)
  • 30HZ/BULK (bulk packaging 30 pcs./pack. – KIT including accessories and screws)
  • 30HZ/BULK/NA (bulk packaging 30 pcs./pack. – excluding accessories and screws)

Alternative versions:

OLDA 30 HZM with extended bolt

Related products:

OLDA 28 HZA with standard bolt
– automatic flush bolt, also with forend width 25 mm

OLDA 28 HZA with extended bolt
– automatic flush bolt, also with forend width 25 mm

Complementary products:

OLDA accessories for flush bolts

OLDA FS 12 and 15
– stainless-steel dust-excluding floor sockets for screw fitting.

OLDA FS R12 and R15
– stainless-steel dust-excluding round floor sockets especially designed for gluing.

Also see:

Type of OLDA flush bolt – guide (pdf)

OLDA Flush bolt guide (pdf)

OLDA Fittings school

Accessories guide OLDA – coming soon

Documents:

product documents

product leaflet
pdf: 30 HZM

dimensions
pdf: 30 HZM

installation
 - with forend cut-out:
pdf: 30 HZM
 - without forend cut-out:
pdf: 30 HZM
product views - 2D

pdf: 30 HZM
dxf: 30 HZM
dwg: 30 HZM
product models - 3D

stp: 30 HZM
igs: 30 HZM
dwg: 30 HZM
sat: 30 HZM
ipt: 30 HZM
stl: 30 HZM

pdf 3D: 30 HZM
SKU: 30 HZ Category: