Manual flush bolt
OLDA 30 HZM – with extended bolt

note. This product was previously called 30 HZ

Function:

Manual, single action flush bolt for non-spring-loaded bolting of passive door leaf in double doors.

Features:

These versions of OLDA 30 HZM has bolts extended to protrude; 8, 15, 20 or 30 mm. This makes it possible to use them, also when there is a large gap between the door leaf and frame or sill, or when a sill is not fitted. They are also intended for integration with suitable automatic drop seals etc.

OLDA 30 HZM is bolted manually with a lever mechanism and has bolt diameter 10 mm, backset 12 mm and forend width 25 mm.

Same dimensions as automatic flush bolts OLDA 28 HZA type 1 and type 2.

Manufactured in steel. Coating: electro zinc plating.

Usage:

To be recessed into wooden doors, both up and/or down in the edge of passive door leaves.

Installation:

OLDA 30 HZM is fitted recessed in the edge of the door, either flush, with cut-out or without cut-out for the forend.

Fixed with four screws.

Accessories:

Lock plate LP 10.

Specification:

• Manual, single action and non-spring-loaded bolt function
• Extended bolt:
  • diameter: 10 mm
  • bolt extension / projection:
    • +8 mm / 27 mm
    • +15 mm / 34 mm
    • +20 mm / 39 mm
    • +30 mm / 49 mm
  • adjustability: -0 / +7 mm
• Round electro zinc plated forend in steel
• Product:
  • width: 25 mm
  • height: 168 mm + bolt extension
  • depth: 20 mm
  • forend thickness: 2 mm
• Backset including forend: 12 mm
• Installation: in door leaf edge
  • fixed with electro zinc plated screws, countersunk (rec. dim. 3,5×40 mm), 4 pcs.
• Accessories: Lock plate LP 10
  • fastened with electro zinc plated screws, countersunk (rec. dim. 3,5×16 mm), 4 pcs.
    
• Material: steel
• Coating: electro zinc plating

Product ID:

OLDA 30 HZM with extended bolt:

• +8 mm: 11-130-0003-11xx
• +15 mm: 11-130-0001-11xx
• +20 mm: 11-130-0004-11xx
• +30 mm: 11-130-0002-11xx

note. Accessories and screws for installation are ordered separately, or as a part of different product KITs.

Alternative versions:

OLDA 30 HZM with standard bolt

Related products:

OLDA 28 HZA with standard bolt
– automatic flush bolt, also with forend width 25 mm

OLDA 28 HZA with extended bolt
– automatic flush bolt, also with forend width 25 mm

Complementary products:

OLDA accessories for flush bolts

OLDA FS 12 and 15
– stainless-steel dust-excluding floor sockets for screw fitting.

OLDA FS R12 and R15
– stainless-steel dust-excluding round floor sockets especially designed for gluing.

Also see:

Type of OLDA flush bolt – guide (pdf)

OLDA Flush bolt guide (pdf)

OLDA Fittings school

Accessory guide OLDA (pdf)

Documents:

product documents

product leaflet
pdf: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30

dimensions
pdf: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30

installation
 - with forend cut-out:
pdf: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30
 - without forend cut-out:
pdf: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30

product views - 2D

pdf: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30

dxf: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30

dwg: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30

product models - 3D

stp: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30

igs: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30

dwg: 30 HZM +8
     30 HZM +15
     30 HZM +20
     30 HZM +30

sat: 30 HZM +8
     30 HZM +15 
     30 HZM +20
     30 HZM +30

ipt: 30 HZM +8
     30 HZM +15 
     30 HZM +20
     30 HZM +30

stl: 30 HZM +8
     30 HZM +15 
     30 HZM +20
     30 HZM +30

pdf 3D: 30 HZM +8 
        30 HZM +15 
        30 HZM +20 
        30 HZM +30