Adjustable lock plate
OLDA 19 HZ
Recommended accessory for flush bolt OLDA 37 HZA.
OLDA 19 HZ has a rectangular opening, width 20 mm which for example suits the rectangular bolt (width 15 mm) on 37 HZA.
This lock plate is adjustable after installation, which is especially useful for larger or older doors, but it also contributes to the ”hold close” function on 37 HZA.
Manufactured in steel. Coating: zinc plating.
Recommended to make installation easier, secure the function and increase the life span of bolts, especially in doors with high frequency of passage.
OLDA 19 HZ is screwed recessed in frame, sill or wooden floor, with cut-out or without cut-out for the forend, which has the dimensions 60 x 25 x 2 mm.
The width of the rear case is 42 mm. Total height is 13 mm including forend.
- width: 20 mm
- depth: (17 mm) – stop adjustable 2-9 mm
- height: 13 mm
- forend: 60 x 25 x 2 mm
- rear case: 42 x 25 mm
- Installation: in frame, sill or wooden floor
- fixed with zinc plated screw, counter sunk (rec. dim. 3,5×16 mm), 4 pcs.
- Material: steel
- Coating: zinc plating
OLDA 19 HZ:
note. Screws for installation are ordered separately, or as a part of different product KITs.
OLDA 37 HZA
– automatic flush bolt, with bolt for pre-load
product documents product leaflet pdf: 19 HZ dimensions pdf: 19 HZ installation - with forend cut-out: pdf: 19 HZ - without forend cut-out: pdf: 19 HZ
product views - 2D pdf: 19 HZ dxf: 19 HZ dwg: 19 HZ
product models - 3D stp: 19 HZ igs: 19 HZ dwg: 19 HZ sat: 19 HZ ipt: 19 HZ stl: 19 HZ pdf 3D: 19 HZ